STABIMATIC COMPANY LTD

• Home
• Company
• Products
• Contact

SP SERIES

Select an Item! AVR/Stabilizer Smart Series Gold Series Single Phase Gold Series Three Phase Advance Series Silver Series SLTR Series DSDST Series Centralized Voltage Stablizer Transformers Variable Series IS Series IST Series Generators Gas Generators Diesal Generators Acessories Batteries Surge Power Strip Meters Electric Energy Meters Gas Energy Meters UPS Slim Series SP Series GS Series GB Series ONL Series NS Series

SP Series, Sine wave, single phase Key Features
MODEL SP800 SP1000 SP1500 SP2000 SP3000 FUNCTION Micro-processor controlled True Sine-wave Line-interactive Topology CAPACITY VA Rating 800 1000 1500 2000 3000 INPUT Voltage Single Phase; 100/ 110/ 115/ 120V or 200/ 220/ 230/ 240V selectable by DIP Range ±23% of nominal input voltage Frequency 50Hz/ 60Hz Auto-selected as input Hz OUTPUT Voltage Normal mode : ± 10% of rated voltage ; inverter mode : ± 3% Frequency Inverter mode : 50Hz or 60Hz±0.1 Hz Waveform Pure sine-wave with THD <5% at linear load TRANSFER TIME Nearly Zero BATTERY Lead-Acid, maintenance free AH Rating 7Ah x 2 9Ah x 2 7Ah x 3 7Ah x 4 7Ah x 6 Half-load runtime (minutes) 12-16 8~12 8-12 8~12 8-12 Recharge time to 90% <8 hrs <5 hrs <2 hrs SURGE PROTECTION Meet with IEEE 587 Cat. A & B standard Energy Rating 960 Joules instantaneous response NOISE FILTERING EMR/RFI Full time suppression Attenuation Better than 45dB @ 1 MHz for Normal/Common mode PROTECTION Over/Under Voltage Switch to Battery Output when Utility over regulation range Overload/Short Circuit Current-limiting & NFB (No Fuse Breaker) protection for both Utility & Battery Mode Low Battery Two stages, no battery drain after cut off DISPLAY & DIAGNOSTICS With LCD & LED display LCD Display Status : Normal, AC Input High, AC Input Low, On Battery, Battery Low, Battery Bad, Overload, Fault, Phase Error, Ground Fault Data : Utility Voltage, Output Voltage, Output Hz, Load%, UPS Temperature, Battery Voltage, HH : MM (runtime timer) LED Display Green - Normal, Amber - Warning, Red - Critical LCD shows details in respect to the lighting indication of LED Beeping Alarm Overload, fault, high temperature, on battery, low battery, Battery Bad, Over/under voltage, frequency error Advanced mode Self-diagnostic ; Direct Time-based readout of battery remained runtime Operational Switch Master Switch (On/Off, DC start) x 1, Selector x 2 Communication Port DB9 port with true RS232 serial signal SAFETY APPROVAL CE / UL Environmental Condition 0 - 37 °C; 0 - 90% Non-Condensing humidity Dimension (W x H x D cm) 17 x 2 4 x 3 8 17 x 2 4 x 3 8 1 7 x 2 4 x 4 7 1 7 x 2 4 x 5 6 17 x 2 4 x 5 6 Weight (N.W./GW) Kgs 12/ 13 15/ 16 21 /22 25/26 36/37 Intelligence The standard RS232 port bundled with communication protocol on Micro-process architecture enables the Intelligence of Stabimatic UPS. With the optional software kit, Stabimatic UPS can be monitored remotely from a PC, either on single computer application or on Ethernet environment. The optional SNMP adapter kit can configure the Stabimatic UPS as a standard Knot among the Internet environment without the need to rely on a computer. Therefore, Stabimaic UPS can be accessed to be monitored or controlled by Networking Manager in the environment of INTERNET